MÜHENDİSLİK FAKÜLTESİ
METALURJİ VE MALZEME MÜHENDİSLİĞİ
Yayınlar

2018

Karakaş, M.S., Günen, A., Kanca, E., Yilmaz, E. Boride layer growth kinetics of AISI H13 steel borided with nano-sized powders (2018) Archives of Metallurgy and Materials, 63 (1), pp. 159-165.

Altintas Yildirim, O.A., Ozturk, T. Graphene-Semiconductor Composites as Visible Light-Induced Photocatalyst. Visible-Light Photocatalysis of Carbon-Based Materials. Ed. Y. Yao (2018) IntechOpen, pp. 67-86.

Yıldırım, M., Keleş, A. Production of Co-Cr-Mo Biomedical Alloys via Investment Casting Technique (2018) Turkish Journal of Electromechanics & Energy, 3 (1), pp. 12-16.

Kaya, İ.C., Akın, S., Akyıldız, H., Sönmezoğlu, S. Highly efficient tandem photoelectrochemical solar cells using coumarin6 dye-sensitized CuCrO2 delafossite oxide as photocathode (2018) Solar Energy, 169, pp. 196-205.

Kalem, V., Shih, W.Y., Shih, W-H. Dielectric and piezoelectric properties of PMN-PT ceramics doped with strontium (2018) Ceramics International, 44 (3), pp. 2835-2842.

Günen, A., Kanca, E., Karakaş, M.S., Koç, V., Gök, M.S., Kanca, Y., Çürük, A., Demir, M. High temperature wear behavior of the surface-modified externally cooled rolls (2018) Surface and Coatings Technology, 348, pp. 130-141.

Küçük, Ö, Teber, S., Kaya, İ.C., Akyıldız, H., Kalem, V. Photocatalytic activity and dielectric properties of hydrothermally derived tetragonal BaTiO3 nanoparticles using TiO2 nanofibers (2018) Journal of Alloys and Compounds, 765, pp. 82-91.

2017

Acarer, M., Arici, G., Acar, F.K., Keskinkilic, S., Kabakci, F. Toughness of 2,25Cr-1Mo steel and weld metal (2017) AIP Conference Proceedings, 1877, art. no. 090003.

Ucar, N., Dogan, S., Ozdemir, A.F., Karakas, S., Calik, A. Diffusion kinetics of binary Ti-Ni shape memory alloys (2017) Acta Physica Polonica A, 132 (3), pp. 524-526.

Çalık, A., Özbakır, Ö., Karakaş, S., Uçar, N. Investigation of the erosive wear resistance of boronized ash-blowing nozzles (2017) Acta Physica Polonica A, 131 (2), pp. 252-254.

Günen, A., Kanca, E., Çakir, H., Karakaş, M.S., Gök, M.S., Küçük, Y., Demir, M. Effect of borotitanizing on microstructure and wear behavior of Inconel 625 (2017) Surface and Coatings Technology, 311, pp. 374-382.

Uludaǧ, M., Kocabaş, M., Dışpınar, D., Çetin, R., Cansever, N. Effect of Sr and Ti addition on the corrosion behaviour of Al-7Si-0.3Mg alloy (2017) Archives of Foundry Engineering, 17 (2), pp. 125-130.

Simos, N., Zhong, Z., Dooryhee, E., Ghose, S., Gill, S., Camino, F., Şavklıyıldız, İ., Akdoğan, E.K. Neutron irradiation and high temperature effects on amorphous Fe-based nano-coatings on steel – A macroscopic assessment (2017) Journal of Nuclear Materials, 489, pp. 164-179.

Yıldırım, M., Akdeniz, M.V., Mekhrabov, A.O. Effect of Ti Addition on Cyclic Oxidation Behavior of FeAl Intermetallics (2017) Korozyon, 23 (1-2), pp. 4-11.

Kaya, İ.C., Akyıldız, H. Production and Characterization of Magnesium-Doped Copper Chromite Fibers (2017) Physica Status Solidi A, 1700795.

2016

Çetin, Ç., Akyildiz, H. Production and characterization of CuCrO2 nanofibers (2016) Materials Chemistry and Physics, 170, pp. 138-144.

Kaya, İ.C., Sevindik, M.A., Akyıldız, H. Characteristics of Fe- and Mg-doped CuCrO2 nanocrystals prepared by hydrothermal synthesis (2016) Journal of Materials Science: Materials in Electronics, 27 (3), pp. 2404-2411.

Altintas Yildirim, O., Arslan, H., Sönmezoğlu, S. Facile synthesis of cobalt-doped zinc oxide thin films for highly efficient visible light photocatalysts (2016) Applied Surface Science, 390, pp. 111-121.

Kalem, V. Structural and electrical properties of SrTiO3-modified Bi0.5(Na,K)0.5TiO3 lead-free ceramics (2016) Journal of Materials Science: Materials in Electronics, 27 (8), pp. 8606-8612.

Ucar, N., Dogan, S., Karakas, M.S., Calik, A. Boriding of binary Ni-Ti shape memory alloys (2016) Zeitschrift fur Naturforschung - Section A Journal of Physical Sciences, 71 (11), pp. 1017-1020.

Esen, Z., Bütev, E., Karakaş, M.S. A comparative study on biodegradation and mechanical properties of pressureless infiltrated Ti/Ti6Al4V–Mg composites (2016) Journal of the Mechanical Behavior of Biomedical Materials, 63, pp. 273-286.

Simos, N., Elbakhshwan, M., Zhong, Z., Ghose, S., Savkliyildiz, I. High-temperature annealing of proton irradiated beryllium - A dilatometry-based study (2016) Journal of Nuclear Materials, 477, pp. 1-17.

Tsakalakos, T., Akdogan, E.K., Savkliyildiz, I., Bicer, H., Kabacoff, L., Visser, B., Paxton, W. Method For Producing Low Porosity Nonoxide Ceramics (2016) Patent No:20160016857.

Yıldırım, M., Akdeniz, M.V., Mekhrabov, A.O. Microstructural Evolution and Room-Temperature Mechanical Properties of As-Cast and Heat-Treated Fe50Al50-nNbnAlloys (n= 1, 3, 5, 7, and 9 at.%) (2016) Materials Science and Engineering A, 664, pp. 17-25.

2015

Pişkin, F., Akyildiz, H., Öztürk, T. Ti modified Pd-Ag membranes for hydrogen separation (2015) International Journal of Hydrogen Energy, 40 (24), pp. 7553-7558.

Kaya, İ.C., Cetin, C., Aydin, H.S., Katircioğlu, Z., Büyükbekar, B.Z., Yavuz, M.S., Uyaner, M., Kalem, V., Akyildiz, H. Production of CuAlo2 in powder, bulk and nanofiber forms (2015) Journal of Ceramic Processing Research, 16 (5), pp. 648-655.

Altintas Yildirim, O., Liu, Y., Petford-Long, A.K. Synthesis of uniformly distributed single- and double-sided zinc oxide (ZnO) nanocombs (2015) Journal of Crystal Growth, 430, pp. 34-40.

Danisman, M., Kocabaş, M., Cansever, N. Diffusion characteristics of plasma nitrided hard chromium on AISI 1010 steel (2015) Materialpruefung/Materials Testing, 57 (5), pp. 443-446.

Kocabaş, M., Danişman, M., Cansever, N., Ülker, Ş. Effect of plasma nitriding time on surface properties of hard chromium electroplated AIS1 1010 steel (2015) Materialpruefung/Materials Testing, 57 (5), pp. 437-442.

Paxton, W.A., Akdoğan, E.K., Şavklıyıldız, İ., Choksi, A.U., Silver, S.X., Tsakalakos, T., Zhong, Z. Asynchronous stoichiometric response in lithium iron phosphate batteries (2015) Journal of Materials Research, 30 (3), pp. 417-423.

2014

Kalem, V., Timucin, M. Dielectric and piezoelectric properties of Sr and La Co-doped PZT ceramics (2014) Ceramic Engineering and Science Proceedings, 34 (10), pp. 311-320.

Calik, A., Simsek, M., Karakas, M.S., Ucar, N. Effect of boronizing on microhardness and wear resistance of steel AISI 1050 and chilled cast iron (2014) Metal Science and Heat Treatment, 56 (1-2), pp. 89-92.

Akkurt, I., Günoǧlu, K., Çalik, A., Karakas, M.S. Determination of gamma ray attenuation coefficients of Al-4% Cu/B4C metal matrix composites at 662, 1173 and 1332 keV (2014) Bulletin of Materials Science, 37 (5), pp. 1175-1179.

Günen, A., Karakaş, M.S., Kurt, B., Çalik, A. Corrosion behavior of borided AISI 304 austenitic stainless steel (2014) Anti-Corrosion Methods and Materials, 61 (2), pp. 112-119.

Karakas, M.S., U̧car, N., Ünüvar, F. Boriding kinetics of pure cobalt (2014) Kovove Materialy, 52 (2), pp. 107-112.

Calik, A., Yakut, A.K., Karakas, M.S., Ucar, N. Effect of boronizing on the deformation behaviour of a H320LA sheet steel (2014) Materialpruefung/Materials Testing, 56 (3), pp. 218-223.

Çalik, A., Karakaş, M.S., Ucar, N., Ünüvar, F. Boriding kinetics of pure cobalt (2014) Kovove Materialy, 52 (2), pp. 107-112.

Calik, A., Akbunar, S., Ucar, N., Yilmaz, N., Karakas, M.S., Akkurt, I. A comparison of radiation shielding of stainless steel with different magnetic properties (2014) Nuclear Technology and Radiation Protection, 29 (3), pp. 186-189.

Yıldırım, M., Akdeniz, M.V., Mekhrabov, A.O. Microstructural Investigation and phaserelationships of Fe-Al-Hf alloys (2014) Metallurgical and Materials Transactions A, 45 (8), pp. 3412-3421.

2013

Gharavi, A.G., Akyildiz, H., Öztürk, T. Thickness effects in hydrogen sorption of Mg/Pd thin films (2013) Journal of Alloys and Compounds, 580 (SUPPL1), pp. S175-S178.

Altintas Yildirim, O., Unalan, H.E., Durucan, C. Highly efficient room temperature synthesis of silver-doped zinc oxide (ZnO: Ag) nanoparticles: Structural, optical, and photocatalytic properties (2013) Journal of the American Ceramic Society, 96 (3), pp. 766-773.

Kalem, V., Timucin, M. Structural, piezoelectric and dielectric properties of PSLZT-PMnN ceramics (2013) Journal of the European Ceramic Society, 33 (1), pp. 105-111.

Çalik, A., Karakas, S., Uçar, N., Akkurt, Y., Turhan, A. Study on the mechanical and radiation-shielding properties of borided aisi 304 stainless steels (2013) Materiali in Tehnologije, 47 (5), pp. 679-681.

Calik, A., Karakaş, M.S. Effect of heat treatment on the microstructure and mechanical properties of martensitic stainless-steel joints welded with austenitic stainless-steel fillers (2013) Materiali in Tehnologije, 47 (4), pp. 403-407.

Şavkliyildiz, I., Akdoǧan, E.K., Zhong, Z., Wang, L., Weidner, D., Vaughan, M., Croft, M.C., Tsakalakos, T. Phase transformations in hypereutectic MgO-Y2O3 nanocomposites at 5.5 GPa (2013) Journal of Applied Physics, 113 (20), art. no. 203520.

Akdoǧan, E.K., Şavkliyildiz, I., Biçer, H., Paxton, W., Toksoy, F., Zhong, Z., Tsakalakos, T. Anomalous lattice expansion in yttria stabilized zirconia under simultaneous applied electric and thermal fields: A time-resolved in situ energy dispersive x-ray diffractometry study with an ultrahigh energy synchrotron probe (2013) Journal of Applied Physics, 113 (23), art. no. 233503.

2012

Çalik, A., Karakaş, M.S., Uçar, N., Aytar, O.B. The effect of boronizing on the magnetization behaviour of low carbon microalloyed steels (2012) Journal of Magnetics, 17 (2), pp. 96-99.

Calik, A., Karakas, S., Ucar, N. Wear behaviour of boronised and induction hardened spheroidal graphite cast iron (2012) Journal of the Balkan Tribological Association, 18 (1), pp. 44-50.

Çalik, A., Karakas, M.S., Varol, R. Fatigue behavior of electron beam welded dissimilar metal joints (2012) Welding Journal, 91 (2), pp. 50s-52s.

Yıldırım, M., Akdeniz M.V., Mekhrabov, A.O. Effect of ternary alloying elements addition on the order-disorder transformation temperatures of B2-type ordered Fe-Al-X intermetallics (2012) Metallurgical and Materials Transactions A, 43 (6) , pp. 1809-1816.

2011

Akyildiz, H., Casper, M.D., Aygün, S.M., Lam, P.G., Maria, J.P. Hydrothermal BaTiO3 thin films from nanostructured Ti templates (2011) Journal of Materials Research, 26 (4), pp. 592-599.

Kalem, V., Cam, B., Timucin, M. Dielectric and piezoelectric properties of PZT ceramics doped with strontium and lanthanum (2011) Ceramics International, 37 (4), pp. 1265-1275.

Yilmaz, E., Ucar, N., Calik, A., Karakas, S., Selbas, R. Boronising effect on the corrosion and wear behaviour of a1s1 8620 steel (2011) Journal of the Balkan Tribological Association, 17 (4), pp. 536-543.

Ekinci, C., Ucar, N., Calik, A., Karakas, S., Akkurt, I. Effects of heat treatment on the microstructure and mechanical properties of low-carbon microalloyed steels (2011) High Temperature Materials and Processes, 30 (1-2), pp. 39-42.

Akdoǧan, E.K., Şavkliyildiz, I., Berke, B., Zhong, Z., Wang, L., Vaughan, M., Tsakalakos, T. High-pressure phase transformations in MgO-Y2O3 nanocomposites (2011) Applied Physics Letters, 99 (14), art. no. 141915.

Akdoğan, E.K., Savkliyildiz, I., Tsakalakos, T., Method for Making Ultra High Strength Ceramics (2011), Rutgers Üniversitesi geçici patent açıklaması 20111007 tarihinde açıldı (Rutgers Docket # RU 2012-028RU).

Akdoğan, E.K., Savkliyildiz, I., Tsakalakos, T., Method for Making Four-phase MgO-Y2O3 Nanocomposite (2011), Rutgers Üniversitesi geçici patent açıklaması 20110613 tarihinde açıldı (Rutgers Docket # RU 2011-171).

Küçük, I, Aykol, M., Uzun, O., Yıldırım, M., Kabaer, M., Duman, N., Ylmaz, F., Ertürk, K., Akdeniz, M.V., Mekhrabov A.O. Effects of (Mo, W)substitution for Nb on Glass forming ability and magnetic properties of Fe-Co-based bulk amorphous alloys fabricated by centrifugal casting (2011) Journal of Alloys and Compounds, 509 (5), pp. 2334-2337.

2010

Özgit, C., Akyildiz, H., Öztürk, T. Isochronal hydrogenation of textured Mg/Pd thin films (2010) Thin Solid Films, 518 (17), pp. 4762-4767.

Akyildiz, H., Öztürk, T. Hydrogen sorption in crystalline and amorphous Mg-Cu thin films (2010) Journal of Alloys and Compounds, 492 (1-2), pp. 745-750.

Altintas Yildirim, O., Durucan, C. Synthesis of zinc oxide nanoparticles elaborated by microemulsion method (2010) Journal of Alloys and Compounds, 506 (2), pp. 944-949.

Karakaş, S. Analysis of a heat exchanger coil tube in a petrochemical reactor after fire (2010) High Temperature Materials and Processes, 29 (4), pp. 233-240.

Simsek, M., Calik, A., Yakut, A.K., Karakas, S., Düzgün, A., Ekinci, A.E., Yildiz, H., Ucar, N. Boronizing effect on the corrosion behaviour of chilled cast iron and AISI 1050 steel (2010) High Temperature Materials and Processes, 29 (4), pp. 241-246.

Yilbas, B.S., Khan, S., Raza, K., Keles, O., Ubeyli, M., Demir, T., Karakas, M.S. Laser cutting of 7050 Al alloy reinforced with Al2O3 and B4C composites (2010) International Journal of Advanced Manufacturing Technology, 50 (1-4), pp. 185-193.

Düzcükoǧlu, H., Çalik, A., Imrek, H., Karakaş, M.S. Examination of pitting and wear in borided, carburized, and borocarburized AISI 8620 gears (2010) Tribology Transactions, 53 (4), pp. 485-490.

2009

Calik, A., Duzgun, A., Ekinci, A.E., Karakas, S., Ucar, N. Comparison of hardness and wear behaviour of boronized and carburized AISI 8620 steels (2009) Acta Physica Polonica A, 116 (6), pp. 1029-1032.

Demir, T., Übeyli, M., Yildirim, R.O., Karakaş, M.S. Response of alumina/4340 steel laminated composites against the impact of 7.62 mm armor piercing projectiles (2009) Science and Engineering of Composite Materials, 16 (2), pp. 89-98.

2008

Übeyli, M., Acir, A., Karakaş, M.S., Ögel, B. Effect of feed rate on tool wear in milling of Al-4%Cu/B4C p composite (2008) Materials and Manufacturing Processes, 23 (8), pp. 865-870.

Übeyli, M., Aar, A., Karakaş, M.S., Demir, T. On the surface roughness of Al-4%Cu/B4C metal matrix composites machined by milling operation (2008) Science and Engineering of Composite Materials, 15 (2), pp. 131-139.

2007

Akyildiz, H., Çakmak, G., Tan, S., Öztürk, T. A screening method for hydrogen storage alloys (2007) Turkish Journal of Engineering and Environmental Sciences, 31 (5), pp. 289-295.

Übeyli, M., Karakaş, M.S., Acir, A., Ögel, B. Study on performance of uncoated and coated tools in milling of Al-4%Cu/B4C metal matrix composites (2007) Materials Science and Technology, 23 (8), pp. 945-950.

2006

Akyildiz, H., Özenbaş, M., Öztürk, T. Hydrogen absorption in magnesium based crystalline thin films (2006) International Journal of Hydrogen Energy, 31 (10), pp. 1379-1383.

Karakaş, M.S., Acir, A., Übeyli, M., Ögel, B. Effect of cutting speed on tool performance in milling of B4Cp reinforced aluminum metal matrix composites (2006) Journal of Materials Processing Technology, 178 (1-3), pp. 241-246.

2004

Öveçoǧlu, M.L., Özalp, M.R., Özen, G., Altin, F., Kalem, V. Crystallization behaviour of some TeO2 - ZnO glasses (2004) Key Engineering Materials, 264-268 (III), pp. 1891-1894.

Kalem, V., Altin, F., Öveçoǧlu, M.L., Özen, G., Özkal, B. Crystallization behavior of (1-x)TeO2- xGeO2 (x = 0.1 and 0.3 mol.) glasses (2004) Key Engineering Materials, 264-268 (III), pp. 1915-1918.

Özalp, M.R., Özen, G., Altin, F., Kalem, V., Öveçoǧlu, M.L. Effect of modifier content on the crystallization and the optical gaps of a TeO2-ZnO glass (2004) Key Engineering Materials, 264-268 (III), pp. 1907-1910.

Kalem, V., Özen, G., Altin, F., Öveçoǧlu, M.L., Özalp, M.R. Kinetic study and optical investigations of some TeO2-GeO2 glasses (2004) Key Engineering Materials, 264-268 (III), pp. 1919-1922.

Altin, F., Kalem, V., Özen, G., Öveçoǧlu, M.L., Özalp, M.R. Optical properties and crystallization kinetics of TeO2-GeO2-ZnO glasses (2004) Key Engineering Materials, 264-268 (III), pp. 1875-1878.

Altin, F., Öveçoǧlu, M.L., Kalem, V., Özkal, B., Özen, G. Crystallization behavior of some TeO2-GeO2-ZnO glasses (2004) Key Engineering Materials, 264-268 (III), pp. 1903-1906.

2003

Ahlatci, H., Karakaş, M.S., Candan, E., Çimenoǧlu, H. Effect of magnesium addition on wear behaviour of Al - 70 vol.-% Al2O3p composites (2003) Materials Science and Technology, 19 (7), pp. 949-954.