MÜHENDİSLİK FAKÜLTESİ
METALURJİ VE MALZEME MÜHENDİSLİĞİ
 
 Adı Soyadı: DOÇ.DR. MUSTAFA SERDAR KARAKAŞ
Fakülte Adı:  MÜHENDİSLİK FAKÜLTESİ METALURJİ VE MALZEME MÜHENDİSLİĞİ BÖLÜMÜ
Ana Bilim Dalı:  METALURJİ VE MALZEME MÜHENDİSLİĞİ
E-Mail :  skarakas selcuk.edu.tr
Telefon : +90 332 223 2205
Adres : Selçuk Üniversitesi Metalurji ve Malzeme Mühendisliği Bölümü D-324, Ardıçlı Mah., 42130 Selçuklu, Konya
Url :
 
  Kurum :
KurumBaşlangıç TarihiBitiş Tarihi
Orta Doğu Teknik Üniversitesi20022007
Iowa State University20062006
Süleyman Demirel Üniversitesi20082013
Çankaya Üniversitesi20132017
Selçuk Üniversitesi2017 

  Akademik Yayınlar:
1. M.S. Karakaş, A. Günen, E. Kanca, E. Yilmaz, " Boride layer growth kinetics of AISI H13 steel borided with nano-sized powders ", Archives of Metallurgy and Materials, 63, , 159-165, 2018,( SCI )
2. A. Günen, E. Kanca, M.S. Karakaş, V. Koç, M.S. Gök, Y. Kanca, A. Çürük, M. Demir, " High temperature wear behavior of the surface-modified externally cooled rolls ", Surface and Coatings Technology, 348, , 130-141, 2018,( SCI )
3. A. Çalık, Ö. Özbakır, S. Karakaş, N. Uçar, " Investigation of the erosive wear resistance of boronized ash-blowing nozzles ", Acta Physica Polonica A, 131, , 252-254, 2017,( SCI )
4. A. Calik, N. Ucar, K. Delikanli, M. Carkci, S. Karakas, " Boriding kinetics and mechanical properties of borided commercial-purity nickel ", Indian Journal of Engineering & Materials Sciences, 24, , 362-368, 2017,( SCI )
5. N. Ucar, C. Ekinci, F. Ozdemir, K. Gunoglu, A. Calik, S. Karakas, " Radiation shielding properties of borided Fe-Ni binary alloys ", 4th International Conference on Computational and Experimental Science and Engineering, ICCESEN2017, Antalya, , 1-7, 2017,( Konferans )
6. A. Günen, E. Kanca, H. Çakır, M.S. Karakaş, M.S. Gök, Y. Küçük, M. Demir, " Effect of borotitanizing on microstructure and wear behavior of Inconel 625 ", Surface and Coatings Technology, 311, , 374-382, 2017,( SCI )
7. A. Günen, E. Kanca, M.S. Karakaş, V. Koç, M.S. Gök, A. Çürük, M. Demir, " Application of different coating methods to external cooling roller and acterization of applied coatings ", 3rd International Iron and Steel Symposium, UDCS2017, Karabük, , 194-200, 2017,( Konferans )
8. M. Demir, E. Kanca, M.S. Karakaş, M. Yildiz, A. Günen, E. Kırar, M.M. Erşen, " An investigation on cutting behavior of CoNiAl shape memory alloy by abrasive water jet ", 3rd International Iron and Steel Symposium, UCDS2017, Karabük, , 189-193, 2017,( Konferans )
9. N. Ucar, S. Dogan, A.F. Ozdemir, S. Karakas, A. Calik, " Diffusion kinetics of binary Ti-Ni shape memory alloys ", Acta Physica Polonica A, 132, , 524-526, 2017,( SCI )
10. E. Kanca, Ö. Uğurlu, M. Demir, A. Günen, M.S. Karakaş, E. Kırar, " Estimation of the effect of wire erosion cutting parameters on surface roughness in Co based shape memory alloys ", 1st International Advanced Researches and Engineering Congress, IAREC2017, Osmaniye, , 1-6, 2017,( Konferans )
11. E. Kanca, M. Demir, S. Yürük, A. Günen, V. Koç, M.S. Karakaş, E. Kırar, " Experimental and finite element analysis of temperature-time curves obtained from the jominy test ", 2nd International Conference on Materials Science and Technology, IMSTEC2017, Nevşehir, , 1-5, 2017,( Konferans )
12. A. Günen, A. Çürük, E. Kanca, M. Demir, M.S. Karakaş, M.S. Gök, E. Kırar, " Investigation of the corrosion behavior of surface-modified STKM-13A steel in hydrofluoric acid solution ", 1st International Advanced Researches and Engineering Congress, IAREC2017, Osmaniye, , 1-6, 2017,( Konferans )
13. E. Kırar, M. Demir, E. Kanca, M.S. Karakaş, A. Günen, " Investigation of shear bands of high speed shearing process with johnson-cook model ", 2nd International Conference on Materials Science and Technology, IMSTEC2017, Nevşehir, , 1-6, 2017,( Konferans )
14. A. Calik, N. Ucar, S. Karakas, S. Duran, " Investigation of structure and some mechanical properties of ETIAL 160 aluminum produced by injection molding method ", 4th International Conference on Computational and Experimental Science and Engineering, ICCESEN2017, Antalya, , 1-6, 2017,( Konferans )
15. N. Ucar, S. Dogan, M.S. Karakas, A. Calik, " Boriding of binary Ni-Ti shape memory alloys ", Zeitschrift für Naturforschung A, 71, , 1017-1020, 2016,( SCI )
16. Z. Esen, E. Bütev, M.S. Karakaş, " A comparative study on biodegradation and mechanical properties of pressureless infiltrated Ti/Ti6Al4V-Mg composites ", Journal of the Mechanical Behavior of Biomedical Materials, 63, , 273-286, 2016,( SCI )
17. N. Uçar, O. İyi, A. Çalık, M.S. Karakaş, " Effect of nickel content on the boronising behaviour of permalloys ", Oxidation Communications, 38, , 748-755, 2015,( SCI )
18. A. Günen, M.S. Karakaş, B. Kurt, A. Çalık, " Corrosion behavior of borided AISI 304 austenitic stainless steel ", Anti-Corrosion Methods and Materials, 61, , 112-118, 2014,( SCI )
19. I. Akkurt, K. Günoğlu, A. Çalık, M.S. Karakaş, " Determination of gamma ray attenuation coefficients of Al-4% Cu/B4C metal matrix composites at 662, 1173 and 1332 keV ", Bulletin of Materials Science, 37, , 1175-1179, 2014,( SCI )
20. A. Çalık, S. Karakaş, N. Uçar, F. Ünüvar, " Boriding kinetics of pure cobalt ", Kovove Materialy, 52, , 107-112, 2014,( SCI )
21. A. Calik, S. Akbunar, N. Ucar, N. Yilmaz, S. Karakas, I. Akkurt, " Comparison of radiation shielding of stainless steel with different magnetic properties ", Nuclear Technology and Radiation Protection, 29, , 186-189, 2014,( SCI )
22. A. Çalik, F. Taylan, M.S. Karakaş, " Modelling of the mechanical properties of electron-beam welded austenitic-ferritic dissimilar joints by genetic evolutionary programming ", 3rd International Conference on Welding Technologies and Exhibition, ICWET14, Manisa, , 106-114, 2014,( Konferans )
23. A. Calik, M. Simsek, M.S. Karakas, N. Ucar, " Effect of boronizing on microhardness and wear resistance of steel AISI 1050 and chilled iron ", Metallovedenie I Termicheskaya Obrabotka Metallov (Rusça), 2, , 31-34, 2014,( Diğer )
24. A. Çalık, A.K. Yakut, M.S. Karakaş, N. Uçar, " Effect of boronizing on the deformation behaviour of a H320LA sheet steel ", Materials Testing, 56, , 218-223, 2014,( SCI )
25. A. Çalık, M. Şimşek, M.S. Karakaş, N. Uçar, " Effect of boronizing on microhardness and wear resistance of steel AISI 1050 and chilled iron ", Metal Science and Heat Treatment, 56, , 89-92, 2014,( SCI )
26. A. Çalık, M.S. Karakaş, " Effect of heat treatment on the microstructure and mechanical properties of martensitic stainless-steel joints welded with austenitic stainless-steel fillers ", Materiali in Tehnologije, 47, , 403-407, 2013,( SCI )
27. M.S. Karakaş, A. Çalık, " Mühendislik eğitiminde disiplinlerarası yaklaşımlar ", Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 17, , 45-49, 2013,( Üniversite Dergisi )
28. A. Çalık, S. Karakaş, N. Uçar, İ. Akkurt, A. Turhan, " Study on the mechanical and radiation-shielding properties of borided AISI 304 stainless steels ", Materiali in Tehnologije, 47, , 679-681, 2013,( SCI )
29. A. Çalık, S. Karakaş, N. Uçar, " Wear behaviour of boronised and induction hardened spheroidal graphite iron ", Journal of the Balkan Tribological Association, 18, , 44-50, 2012,( SCI )
30. A. Çalık, M.S. Karakaş, F. Sarsılmaz, " Plazma arkı ile ergitilen Ti-6Al-4V alaşımının mikroyapısının incelenmesi ", 2nd International Conference on Welding Technologies and Exhibition, ICWET12 , Ankara, , 307-311, 2012,( Konferans )
31. A. Çalık, M.S. Karakaş, R. Varol, " Fatigue behavior of electron beam welded dissimilar metal joints ", Welding Journal, 91, , 50s-52s, 2012,( SCI )
32. A. Çalık, M.S. Karakaş, N. Uçar, Ö.B. Aytar, " The effect of boronizing on the magnetization behaviour of low carbon microalloyed steels ", Journal of Magnetics, 17, , 96-99, 2012,( SCI )
33. M.S. Karakaş, A. Çalık, " Mühendislik eğitiminde disiplinlerarası yaklaşımlar ", Geleceğin Mühendislik Eğitiminde Endüstri ile İşbirliği Sempozyumu, MEEİS2012, Isparta, , 92-97, 2012,( Konferans )
34. İ. Akkurt, K. Günoğlu, A. Çalık, M.S. Karakaş, " Investigation of photon attenuation coefficient of metal matrix composites including boron carbide ", III. International Conference on Nuclear & Renewable Energy Resources, NuRER2012, İstanbul, , 1-6, 2012,( Konferans )
35. E. Yılmaz, N. Uçar, A. Çalık, S. Karakaş, R. Selbaş, " Boronising effect on the corrosion and wear behaviour of AISI 8620 steel ", Journal of the Balkan Tribological Association, 17, , 536-543, 2011,( SCI )
36. C. Ekinci, N. Uçar, A. Çalık, S. Karakaş, İ. Akkurt, " Effects of heat treatment on the microstructure and mechanical properties of low-carbon microalloyed steels ", High Temperature Materials and Processes, 30, , 39-42, 2011,( SCI )
37. A. Çalık, N. Uçar, Ö.B. Aytar, M.S. Karakaş, " Effect of boronizing duration on hardness and boride layer thickness of low carbon microalloy steels ", 17th International Symposium on Boron, Borides and Related Materials, ISBB2011, İstanbul, , 164-165, 2011,( Konferans )
38. B.S. Yılbaş, S. Khan, K. Raza, Ö. Keleş, M. Übeyli, T. Demir, M.S. Karakaş, " Laser cutting of 7050 Al alloy reinforced with Al2O3 and B4C composites ", The International Journal of Advanced Manufacturing Technology, 50, , 185-193, 2010,( SCI )
39. S. Karakaş, " Analysis of a heat exchanger coil tube in a petrochemical reactor after fire ", High Temperature Materials and Processes, 29, , 233-240, 2010,( SCI )
40. H. Düzcükoğlu, A. Çalık, H. İmrek, M.S. Karakaş, " Examination of Pitting and Wear in Borided, Carburized and Borocarburized AISI 8620 Gears ", Tribology Transactions, 53, , 485-490, 2010,( SCI )
41. M. Şimşek, A. Çalık, A.K. Yakut, S. Karakaş A. Düzgün, A.E. Ekinci, H. Yıldız, N. Uçar, " Boronizing effect on the corrosion behaviour of chilled iron and AISI 1050 steel ", High Temperature Materials and Processes, 29, , 241-246, 2010,( SCI )
42. T. Demir, M. Übeyli, O. Yıldırım, M.S. Karakaş, " Response of alumina/4340 steel laminated composites against the impact of 7.62 mm armor piercing projectiles ", Science and Engineering of Composite Materials , 16, , 89-98, 2009,( SCI )
43. A. Çalık, A. Düzgün, A.E. Ekinci, S. Karakaş, N. Uçar, " Comparison of hardness and wear behaviour of boronized and carburized AISI 8620 steels ", Acta Physica Polonica A, 116, , 1029-1032, 2009,( SCI )
44. M. Übeyli, A. Acır, M.S. Karakaş, T. Demir, " On the surface roughness of Al-4%Cu/B4C metal matrix composites machined by milling operation ", Science and Engineering of Composite Materials , 15, , 131-140, 2008,( SCI )
45. M. Übeyli, A. Acır, M.S. Karakaş, B. Ögel, " Effect of feed rate on tool wear in milling of Al-4% Cu/B4Cp composite ", Materials and Manufacturing Processes, 23, , 865-870, 2008,( SCI )
46. T. Demir, M. Übeyli, R.O. Yıldırım, M.S. Karakaş, " Investigation on the ballistic performance of alumina/4340 steel laminated composite armor against 7.62 mm armor piercing projectile ", 17th International Conference on Metallurgy and Materials, METAL2008, Hradec nad Moravici, , 1-7, 2008,( Konferans )
47. M. Übeyli, M.S. Karakaş, A. Acır, B. Ögel, " Study on performance of uncoated and coated tools in milling of Al-4%Cu/B4C metal matrix composites ", Materials Science and Technology, 23, , 945-950, 2007,( SCI )
48. A. Acır, M.S. Karakaş, M. Übeyli, B. Ögel, " Metal matriksli kompozitlerin işlenmesinde kesici takım kaplamasının aşınmaya etkisinin deneysel incelenmesi ", Tasarım İmalat Analiz Kongresi, TİMAK, Balıkesir, , 269-275, 2006,( Konferans )
49. M.S. Karakaş, A. Acır, M. Übeyli, B. Ögel, " Effect of cutting speed on tool performance in milling of B4Cp reinforced aluminum metal matrix composites ", Journal of Materials Processing Technology, 178, , 241-246, 2006,( SCI )
50. S. Karakaş, O. Yıldırım, B. Ögel, " Kompozit zırhlara genel bakış ve alüminyum/bor karbür zırhlarının üretimi ", MSB ARGE ve Tekno.D.Bşk.lığı Zırh Teknolojileri Semineri, Ankara, , 134-144, 2005,( Konferans )
51. H. Ahlatcı, M.S. Karakaş, E. Candan, H. Çimenoğlu, " Effect of magnesium addition on wear behaviour of Al-70 vol.%Al2O3p composites ", Materials Science and Technology, 19, , 949-954, 2003,( SCI )
52. M.S. Karakaş, H. Ahlatcı, E. Candan, H. Çimenoğlu, " Dry sliding wear of Al-70 vol. % Al2O3 composites ", 2nd International Conference on Tribology, Mediterraneantrib2002, Kayseri, , 153-157, 2002,( Konferans )


  Yönetilen Tezler

  Yöneticilik Görevleri:
KurumBaşlangıç TarihiBitiş Tarihi
Süleyman Demirel Üniversitesi İmalat Mühendisliği Bölüm Başkan Yardımcılığı20102012
Çankaya Üniversitesi Malzeme Bilimi ve Mühendisliği Bölüm Başkanlığı20152017

 Kurum İçi Yöneticilik Görevleri:

 Ek Bilgi

 Dersler
Dersin Adı
LİSANS DANIŞMANLIĞI
MALZEMELERDE HASAR VE ANALİZ SEÇMELİ-V-
METALURJİ VE MALZ. MÜH. UYGULAMALARI-I-
TOZ METALURJİSİ